HOTEL ACCESS · MALAYSIA SELECTION
BE-TECH BASE II RETRO RFID Hotel Card Lock
Source-listed values: Power: 4 x 1.5V AA alkaline batteries; Battery Location: Inside of the back lock. Check the source and configuration notes below.
14 published fields · Specification data available · Reviewed 7 October 2026
Product artwork
Parameters from the linked sources
Product advantages and buyer fit
- Mechanical override offers a way in when electronic credentials or power are unavailable. Test the emergency procedure during commissioning.
- Compare the stated dimensions with your existing doors before ordering. Check the drilling drawing for this model and fit a sample.
What the published attributes mean for your project
Door fit and replacement cost
Door Thickness: 35-60mm (only for EURO mortise)
Compare these measurements with your existing doors. Before covering old cut-outs or changing the mortise, check the matching drawing and fit a sample.
Credentials and front-desk workflow
Emergency Opening Options: Emergency Opening with Mechanical cylinder
Check that the stated configuration fits your credentials and staff workflow. Test checkout and lost-credential handling.
Power and maintenance planning
Power: 4 x 1.5V AA alkaline batteries
Plan consumables, service access and failure recovery around the stated power supply and endurance conditions.
Published product attributes
| Attribute | Published value | Source |
|---|---|---|
| Power | 4 x 1.5V AA alkaline batteries | Published product detail |
| Battery Location | Inside of the back lock | Published product detail |
| Material | Handles: Stainless steel quality SUS304. | Published product detail |
| Lock body | Stainless steel quality SUS304 | Published product detail |
| Metal Finishes | Silver, Matte Black | Published product detail |
| Emergency Opening Options | Emergency Opening with Mechanical cylinder | Published product detail |
| Locking Mechanism | Electro-mechanical locking mechanism | Published product detail |
| Door Thickness | 35-60mm (only for EURO mortise) | Published product detail |
| System Software Compatibility | BIS Hotel | Published product detail |
| Storage Temperature | Workable -20˚C~60˚C: non-condensing environment | Published product detail |
| Tested Operating Temperature | Tested from -25˚C~70˚C | Published product detail |
| Supported RFID Standard | ISO 14443 A (MIFARE Classic) | Published product detail |
| Mortise | Compatible with all EN mechanical mortise | Published product detail |
| Product category | Hotel access product | Published product detail |
Documents and installation guidance
Installation manual: pending.
Technical document check
- BASE II RETRO RFID datasheet 2018Oct19
Datasheet · The official download center identifies this named product/family. Confirm the ordered configuration and document revision; this is not a verified installation manual.
Document search: 2026-10-14. The official library lists model and family PDFs. Links were matched to the corresponding named record; unmatched variants still need supplier confirmation.
Official document or support entry — Official model and family datasheets; filenames, editions and configuration scope differ.
Sources and search scope
Official BE-TECH download library, direct linked PDFs, indexed official legacy PDFs and existing model-source evidence.
- BE-TECH official download library — Reviewed model/family document titles and direct file targets.
- Guardian RFID legacy datasheet — Four-page datasheet, 2017 edition.
- Collected product detail source — model identity reference.
Configuration and procurement checks
Unpublished or unverified items
- Model-specific installation manual contents and Malaysia acceptance not verified
Malaysia project acceptance
- Check the ordered product against your measured door or accessory schedule, then test an installation sample.
- Before rollout, test the actual software and what happens at checkout, when a credential is lost and when power fails.
- Ask the quotation to name the installer and set out the applicable local documents, warranty and service coverage.
Continue your product checks
From this supplier
- Supplier profile
- Collected product catalogue
- BE-TECH BASE II Lever RFID Hotel Card Lock
- Be-Tech Smart Lock K10
Same published category
Compare published specifications for products in this category.